五月天丁香花综合婷婷-美女被插入视频在线观看-国产婷婷一区二区三区久久-精品熟女少妇免费久久

[說 明]：

“CH-666尼龍催化劑”采用:德國技術+德國進口原料+德國工藝,精心制作而成。

[亮 點]：

固色效果更好,手感較柔軟,彈力影響少，高附著力，耐磨性強。

1.解決尼龍固色劑由日本、美國、荷蘭、西班牙等國家壟斷現象。

2.解決尼龍固色劑:易硬化, 易凝固(不易儲藏)等不穩定現象。

3.解決尼龍固色劑:快干,易堵網版現象。

[包 裝]：

每桶凈重為1KG、20 KG

[性 質]：

外 觀: 淡黃色透明液體

主成分: 特殊德國進口異氰酸酯等交聯劑原料合成離子性: 非離子

[保 質 期]：

室溫5-35℃, 避免暴曬 或 受凍, 一般可貯存1年。(環境保持陰涼、干燥、通風)

[特 征]：

對化纖、尼龍、萊卡、牛仔石磨、皮革等都有良好的適應性。

[應 用]：

滾筒、圓網、平網、手工印花和噴花多種工藝,投放比例2-5% (根據實際情況酌情舔加)。

[用途]：

1)添加到涂料印花膠漿中,可以很好的提高印花的耐附著力和摩擦性。

2)添加到尼龍漿、牛仔石磨漿里能顯著提高漿料的耐摩擦性和耐附著力，但不影響漿料的彈性和手感。

3）添加到水性丙稀酸樹脂與水性聚氨酯樹脂乳液中,熱處理后可以顯著提高粘合強度。

4)添加到棉及滌棉處理漿中一起使用,可以提高耐久拒水抗油強度。

5)添加到丁苯類乳膠水溶性粘合劑中使用,熱處理后能顯著提高粘合強度。

6)添加到任何水性帶烘焙工藝的漿料中一起使用,可以明顯改善涂層的耐擦洗、耐摩擦、耐化學腐蝕與耐候性。

[注意事項]：

每批次貨/每次使用前,必須認真試驗,確認后方可使用。

1)助劑從包裝桶中倒出后,不得灌回去。避免細菌進入引起變質。

2) CH-666尼龍催化劑可以有效提高印花面的色牢度與摩擦牢度(注意催化劑的時效性),避免與陽離子助劑混用。

3)干透后再進行烘焙熱處理,可以增加牢度。12-24小時后,方可測試?yán)味取?

Other detailed information

[specification]:

“CH-666 Nylon catalyst “adopts Germany technology+Germany imported raw material+Germany technique.

[bright spot]:

Good fixation effect, soft hand feel, less influence of stretch, high adhesion and strong resistance to wear.

1.To solve the monopoly phenomenon of nylon fixing agent caused by Japan, America, Netherlands ans Spain.

2.To solve the unstable phenomenon of Nylon fixing agent that are easy to hardening, easy to solidificate(uneasy to store).

3.To solve the phenomenon of Nylon fixing agent that are drying faster and easy to mesh plug.

[package] :

Net weight 1KG, 20 KG per drum.

[characters]:

Appearance :slight yellow transparent liquid

Main component: composite by cross linker like special Germany imported isocyanate Ionic:

[shelf life]:

At room temperature 5-35℃，avoid to sun exposure or freeze, could be stored for one year as usual(the environment should be cool, well-ventilated and dry)

[features]:

It has good adaptability for chemical fiber、Nylon、Lycra、denim and leather.

[application]:

Cylinder、rotary screen、flat screen、hand-printing and spray printing,the ratio is 2-5%(according to actual situation to add )

[usage ]:

1)adding into printing paste,could improve the ability of adhesion and resistance to friction.

2)Adding into nylon paste and denim graphite paste could apparently improve the paste’s ability of resistance to friction and adhesion,but it could not affect its strength and hand feel.

3)adding into water-based acrylic resin and water-based polyurethane resin,could improve the viscosity after heat pressure.

4)Adding into cotton and polyester cotton dealing paste,could improve the ability of washing.

5)adding into ibuprofen adhesive paste ,could improve viscosity after heat pressure.

6)adding into any water-based with baking technique paste,could improve wash、friction、chemical etching and weather resistance.

[notes]:

Before using every batch or each time, must make a test and use under certain condition.

1).once the auxiliary pour out from package ,it could not be put back again.avoid to let bacteria into and cause metamorphic.

2)CH-666nylon catalyst could improve color fastness and friction fastness effectively(pay attention to the timeliness of catalyst.)avoid to use composite with cationic auxiliary.

3)After drying make a bake heat pressure to increase fastness.Making fastness test after 12-24hours.